At Clean Tech Controls, quality is our number one priority. We hold an ISO 9001 certification, which proves that we have a well-structured and organised quality management system.
This shows that Clean Tech Controls:
- • has a long-term strategy to ensure consistent, high-quality output.
- • follows ISO requirements to guarantee that every product meets the same level of quality and fully complies with established standards.
At Clean Tech Controls, quality is at the core of everything we do, supported by our ongoing ISO 9001 certification. This globally recognised standard guides our approach to quality management, from daily workflows to long-term strategy. By maintaining compliance with ISO requirements, we ensure that every product/service we deliver meets consistent, measurable quality expectations.
Clean Tech Controls: What We’ve Achieved Over the Years
Ever wondered how Clean Tech Controls became one of Australia’s trusted names in switchboards, control panels, and clean-energy integration? If you’ve ever seen our work on a project and thought, “How did they get this far?” — this article lays it all out.
Clean Tech Controls has grown through hard work, long-term planning, and a commitment to quality. And yes — there were challenges along the way. But each challenge pushed us to level up, improve our processes, and deliver better solutions for our clients.
Let’s look at the major accomplishments that shaped who we are today.
We started at the basics — and mastered them.
Before becoming known for renewable-energy and medium-voltage work, Clean Tech Controls focused on one thing: building reliable switchboards.
Over the years, we’ve built:
- • Main switchboards for commercial and industrial projects
- • Mechanical Services Switchboards for HVAC and building systems
- • Motor Control Centres for pumps, motors, and industrial processes
- • Distribution Boards for lighting and power
- • Custom control panels for automation, monitoring, and protection
We learned how to build solutions, not just equipment.
“Reliability isn’t an accident — it’s the result of consistent processes. That’s been one of our greatest strengths since day one.”
The industry changed — and we changed with it.
Renewable energy exploded across Australia. Solar farms, battery storage, EV chargers — everything needed safe, compliant, smart electrical infrastructure.
Clean Tech Controls became one of the early adopters of:
- • Solar PV grid-protection boards
- • Battery storage switchboards
- • Hybrid renewable–diesel power systems
- • Microgrid and off-grid electrical systems
- • EV Charger Distribution Boards (EVDBs)
Instead of waiting for change, we moved toward it. This decision opened the door for some of our proudest accomplishments — supplying equipment for clean-energy projects across the country.
“Don’t run from the future. Run toward it — and build it.”
Quality became our identity — not just a requirement.
If there’s one thing that defined our achievements, it’s this:
Quality became non-negotiable.
That’s why Clean Tech Controls aligned every part of the business with ISO 9001 standards.
ISO helped us:
- • organise our processes
- • maintain consistent product quality
- • reduce errors and rework
- • track improvements year after year
- • deliver predictable outcomes for clients
When every switchboard passes through a defined quality pathway, you don’t hope for quality — you guarantee it.
“When you build a system for quality, quality becomes automatic.”
Mechanical Services Switchboards became one of our specialties.
Mechanical switchboards can be intimidating. They’re big. They’re complex. They power essential building systems that cannot fail.
Some manufacturers avoid MSSBs because they require:
- • high fault-level designs
- • careful coordination
- • detailed shop drawings
- • advanced automation
- • strict compliance requirements
Today, Clean Tech Controls is known for delivering MSSBs for:
- • hospitals
- • commercial towers
- • industrial plants
- • data centres
- • residential high-rises
These projects strengthened our engineering capability and expanded our market reach.
“When a challenge looks too big, tackle it anyway — you might discover it’s your next specialty.”
We moved into medium-voltage systems — a major milestone.
Not every switchboard manufacturer can say this, but we can:
Clean Tech Controls builds and supports medium-voltage systems.
These include 11 kV and 22 kV systems used for:
- • large solar farms
- • battery storage sites
- • industrial facilities with heavy loads
- • embedded networks
- • microgrids
Handling medium voltage requires deeper engineering, stricter testing, and higher compliance obligations. It marked a major step forward for our team.
“Growth happens when you push into the next level — even when it feels uncomfortable at first.”
We built full engineering and commissioning capabilities.
Most manufacturers stop at fabrication.
We didn’t.
We built an entire engineering and on-site commissioning division capable of:
- • factory acceptance testing
- • site testing & commissioning
- • protection relay programming
- • SCADA and PLC integration
- • grid-compliance configuration
- • power quality analysis
This means clients don’t just receive a switchboard — they receive a fully engineered solution from concept to commissioning.
This accomplishment transformed Clean Tech Controls from a supplier into a partner.
“Adding value makes you indispensable.”
We joined and contributed to major industry organisations.
Our progress isn’t just internal. Clean Tech Controls is an active member of:
- • NESMA, which drives industry standards for switchboard safety
- • The Clean Energy Council, supporting Australia’s renewable energy boom
Membership in these organisations isn’t just something to list on paper. It reflects:
- • industry responsibility
- • ongoing improvement
- • collaboration
- • compliance
- • accountability
These affiliations strengthened our voice in the sector — and ensured we always remain aligned with industry best practices.
“Success grows faster when you grow alongside your industry, not outside of it.”
We built a portfolio of successful projects across Australia.
A company’s accomplishments are best measured by what it has delivered.
Clean Tech Controls has supplied switchboards to:
- • commercial towers
- • government facilities
- • industrial plants
- • solar farms
- • battery storage systems
- • EV charging networks
- • residential projects
- • microgrids and off-grid power systems
Each project strengthened our expertise and expanded our reputation.
“Your track record speaks louder than your marketing.”
So what makes all these accomplishments meaningful?
Because they weren’t achieved overnight. They came from:
- • continuous learning
- • adapting to new technologies
- • working with the right people
- • taking on challenges others avoided
- • committing to quality no matter what
Clean Tech Controls’ accomplishments tell a story — one of growth, innovation, and long-term vision in an industry that never slows down.
Our Switchboard Offerings
Main Switchboards
For large sites such as shopping centres and industrial properties, our MSBs are outdoor-rated and typically rated at 50kA. Current ratings generally range between 630A and 3200A.
Medium Voltage
Our medium voltage and RMU offerings are typically 11kV, 22kV, or 33kV and can be used to extend an existing network or connect embedded generation or microgrids to the grid.
Solar PV & Battery Switchboards
Also known as Grid Protection Units (GPU), PV Distribution Boards (PVDB), and Network Protection Units (NPU), these switchboards aggregate embedded generation and protect the grid.
Microgrids & Stand-Alone Power Systems
We provide switchboards to protect and control stand-alone power systems (SAPS) and microgrids. These systems manage various electricity sources such as BESS, gensets, solar, and the grid to ensure consistent power.
Switchboards for Electric Vehicle Chargers
Also referred to as EVDBs, we have extensive experience supplying switchboards for EV charging stations with the required load control and phase balancing capabilities.
Switchboards for BESS Projects
Our BESS switchboards integrate power, protection, control, and SCADA systems to align with grid requirements and community needs.
Supplying Switchboards Across Australia
We proudly supply switchboards across all states and territories, including Western Australia, Queensland, Victoria, New South Wales, Northern Territory, and South Australia.
ISO 9001 certification reflects our ongoing dedication to efficiency, accountability, and excellence. For contractors, engineers, and project managers, this ensures that every product or service from Clean Tech Controls meets consistent standards and can support compliance with procurement or regulatory requirements.
We’re proud to continue building trust with our clients, partners, and stakeholders. At Clean Tech Controls, quality isn’t just a goal — it’s the foundation of everything we do.
We design and manufacture high-quality switchboards. Contact us today to discuss your requirements and get started!