Victoria’s Emergency Backstop – Why is it important?
Victoria’s lowest-ever electricity demand of 1,564 megawatts (MW) at 1:00 PM was recorded on December 31, 2023. This was due to a significant supply of electricity from solar panels installed in households and workplaces. Solar power constituted 66% of the energy consumed in Victoria...
View Now
Why is South Australia’s energy demand dropping every year?
South Australia’s power consumption was an all-time low of -205 MW on 19 October, 2024, at 1:00 PM. A short power shutdown, sunny skies, and moderate temperatures caused this decline. Solar panels supplied 114% of the required electricity at the time, allowing the extra...
View Now
Is the emergency backstop in WA the best solution?
Emergency backstop is a scheme to regulate excess electricity produced from solar panels installed on houses. When solar power is over-produced and unused, the energy grid becomes unreliable. This would be the case when it’s a sunny day but people consume minimal power. To...
View Now
What is the best generator for commercial off-grid power?
Prior to selecting a generator, companies must determine how much electricity they consume on a daily basis. Certain companies, such as factories, consume a significant amount of electricity on a constant basis, while others, such as warehouses, can consume less. The generator must be...
View Now
What Are Switchboard Rooms? When is it required?
Switchboard rooms are dedicated space specifically designed to house one or more switchboards. It provides safe operational and maintenance access around the equipment, protects the switchboards from environmental and physical damage, and separates electrical distribution from general building operations. In smaller installations, a switchboard...
View Now
Who Must Be Able to Access the Switchboard Under AS/NZS 3000?
Every electrical installation relies on a central point for control, protection, and distribution of electricity, and that point is the switchboard. In Australia, the design, installation, and accessibility requirements for switchboards are governed by AS/NZS 3000:2018, commonly called the Wiring Rules. Understanding who must be...
View Now
Switchboard Location Requirements: How Can We Protect Against Mechanical Damage?
When you decide where to install a switchboard, you are making a choice that affects not only convenience but also the long-term safety and reliability of the electrical installation. One of the most important considerations under AS/NZS 3000:2018, the AS/NZS 3000:2018, is protection against...
View Now
Ventilation requirements – Switchboard Location Requirements
Australia’s climate makes ventilation particularly critical. In many regions, ambient temperatures regularly exceed 35 degrees Celsius, and in some areas, temperatures can climb much higher. When high ambient temperatures combine with internally generated heat inside a switchboard, thermal stress can quickly increase. AS/NZS 3000...
View Now
What’s the Best Generator Size for Off-Grid Living?
A generator size should be roughly twice as powerful as your inverter. This will allow it to charge the battery and power your house. For instance, if your inverter is 4,000 watts, you require a generator that is at least 6,880 watts. In this...
View Now
What makes a hybrid energy system cost-effective?
Hybrid energy system consist of three major components: solar panels, batteries, and generators. They also consist of an intelligent control system for all of them. Solar panels collect energy from the sun and generate electricity. They supply companies with power during the day. If...
View Now