Leakage Current – How to Prevent Shocks and Electrical Fires
Leakage current is the small, unintended flow of electrical current that escapes the intended path in a circuit. Ideally, current flows from the supply, through the live conductor, through the load, and back via the neutral conductor. In reality, insulation is never perfect, wires...
View Now
3 Phase Panel Board – Everything You Need to Know for Safe Electrical Installations
A 3 Phase Panel Board uses three active conductors, typically referred to as L1, L2, and L3. Each of these carries alternating current, but the key difference is that they are offset from each other by 120 degrees. What does that mean for you...
View Now
Main Switch – Its Purpose and Role in a Control Panel
Main switch is one of the most important components in a control panel. It may look simple at first glance, but this single device has a massive impact on how the entire system operates. Without it, you lose proper control over your electrical supply,...
View Now
Insulation tester – What is the purpose? Explained!
An insulation tester, also called an insulation resistance tester or megohmmeter, is a specialized electrical instrument that measures how well insulation resists electrical leakage. In electrical systems, insulation surrounds conductors, cables, and equipment to prevent current from flowing along unintended paths. Effective insulation allows...
View Now
What makes AS/NZS 61439.4:2016 vital for construction sites?
AS/NZS 61439.4:2016 applies to electrical panels and switchboards that use up to 1,000 volts of electricity. These systems help distribute power across a construction site. Some of these panels are fixed in place, while others are movable or portable so workers can take them...
View Now
How is a distribution board tested for safety?
A distribution board is a box filled with switches and protective devices that regulate the flow of electricity within a house or small company. The AS/NZS 61439.3:2016 standard was developed to ensure such boards are safe, durable, and function properly. This regulation is drawn...
View Now
How do AS/NZS 61439.1 general rules compare to old standard?
AS/NZS 61439.1 is a standard that assists in ensuring electrical equipment, such as switchboards, is safe and functions properly. The standard is applied in Australia and New Zealand and is founded on international standards. It maintains electrical systems reliable and safeguards individuals against hazards...
View Now
What makes AS/NZS 61439.0 essential for compliance?
AS/NZS 61439.0 is a guide that assists individuals in selecting the appropriate electrical equipment for factories and buildings. It is one of a series of rules applied in Australia and New Zealand to ensure electrical systems are safe and function as they should. The...
View Now
Is the NSW Emergency backstop rule good for solar users?
The NSW Emergency Backstop Mechanism is a regulation that will enable the government to temporarily cut or halt the flow of solar energy into the power grid during times when there is too much. It will only be applied to new or upgraded solar...
View Now
Why is managing Queensland’s solar energy a challenge?
Queensland’s power grid is transforming rapidly with increasing numbers of homes and companies installing solar panels. The state had its all-time lowest power demand on August 18, 2024, at a mere 3,096 megawatts (MW) during 1:00 PM. Solar panels at the time provided 55%...
View Now